Trucks are a vital means of transport in various industries. Therefore, many manufacturers are playing in the truck market in the business world of transportation and expedition. Various manufacturers come with technological advantages and features to make it easier to operate trucks and make it easier to complete the work. Not only that, almost most of these types of heavy equipment using diesel engines that have great power. Great power on the engine is necessary to facilitate the truck driving with heavy loads. If one day your truck is damaged you can find a service place, 24 hour truck service near me.

For maintenance issues, truck maintenance with high-tech diesel engines is different from conventional trucks. A lot of attention to keep the performance and performance of the truck is maintained. Trucks used for mining or plantation industries, for example, are different from those used for logistics. Trucks for mining usually carry very heavy material but with a distance not too far away. Meanwhile, truck for logistics is usually prepared to move goods with a considerable distance.

Here are some tips and tips on dump truck maintenance to keep the condition of the conveyance is still comfortable when used,

Users of diesel engine trucks should not rush to run the truck. It’s good to warm up the machine when first turned on, 3 – 5 minutes. This heating works to provide maximum lubrication on all parts of the machine.

When will be used check back fuel tank. Do not let the fuel tank empty. It is recommended when the tank contains 1/3 of capacity, it should be refilled immediately. If the tank is empty or runs out of fuel, the truck driver must pump the pump injection because the truck’s fuel properties do not evaporate. In case of damage to the injection pump should be repaired immediately in the official workshop.

Use engine oil recommended by the manufacturer as one of the truck maintenance tips. Machines that have been equipped with different turbochargers with conventional machines.

Replace fuel filters on a regular basis. By replacing this component on a regular basis it can minimize the impurities that enter into the machine.

Clean the air filter and replace if necessary according to the manufacturer’s rules.

Avoid turning off the engine unexpectedly. Some trucks are equipped with special features even though the ignition key is off, but the engine still lives on until normal engine temperature returns.

Hydraulics are a vital component of a truck. For that, it takes truck maintenance tips for this component can work optimally. Make sure there is no leak in the hydraulic system. Clean the hydraulic component after doing the work. Dirty hydraulic component will cause the hydraulic performance is not maximal.

Require use of quality fuel. some diesel engines have brought new technology. Some truck engines will die and can not be turned on if the fuel conditions are not good and dirty. There is a sensor on the truck machine.

Finally, check batteries, cables and spark plugs.